a new way to take care of your family

Light, Green & Well-Insulated

Why Use Lightweight Insulation Blocks?

Lightweight Insulation Blocks are green & toxic free

Our lightweight insulation blocks are made from recycled LCD glass, which do not contain any toxic byproducts such as asbestos and formaldehyde. The blocks are certified as non-combustible, sound proofing, and heat resistant construction material. In addition, the blocks reduce up to 50% of the average weight of partition walls, ceiling blocks, and fire doors, yet they are classified as eco-efficient building material.


Under the CNS12514 standards, our block is certified for the 3-hour fire rating, with a melting point up to 2206 oF. Its fire resistant capability is well exceed the reinforced concrete wall that it shows no sign of collapsing after the 3-hour fire performance.


The test result that is conducted strictly according to ASTM E1413 shows that our block has excellent sound attenuation property, 42db (STC 42), because it contains numerous uniformly distributed air pores. It meets the need of home quietness while having the wall thickness reduced to increase the living space.


The weight of the insulation blocks is 33lb/sqft, which are much lighter than ordinary bricks or concrete blocks. Lower dead weight means less structural cost, and less thickness also provides more usable space for the building. Even with such light weight, they are as durable as concrete wall. And they can be used in both interior and exterior walls.


Formaldehyde, ether, and asbestos have an impact on the human nervous system and health. Our Our blocks are completely free from those toxic materials; in addition, we make sure to reduce the exposure to asbestos or formaldehyde during the construction process.


The insulation block has the thermal conductivity of 0.071 (W/(m·K)), which causes the temperature difference reach to 53°F  between indoor and outdoor during the summer time. It can save up to 20% of electriciy on air-conditioners.
We use Innovative Type II Green LCD Glass Recycling that improves Construction Quality, Material Quality and creates a Sustainable Service for your buildings and the environment.


The lightweight insulation blocks involve dry construction, keeping your construction site clean and dry. Also, the standardisation and systematic assembly mode is used during construction to acheive quality control. Lastly, the installation rate of 215 ft2/man/day can be achieved by using our blocks, which is more efficient than installing red brick walls or reinforced concrete walls.

Structural Charateristics and Composition

Rubies and SapphiresThe main components of the lightweight insulation block are cement and glass panel (cocntaining silicon oxide and aluminum oxide).

Alumina is one of the main components in rubies and sapphires. Both gems are tough and durable, which are used in precision cutting and the brake systems of high-speed railyway.

A component like silicon oxide has a low cofficient point of expansion with high Mohs scale of mineral hardness. In addition, it has low thermal conductivity which is great for a heat-resistant material.

A honeycomb structure is formed after combining this "difficult-to-obtain" materail with cement, and its use in construction material, sound proof material, and fire-prevention material becomes a new breakthrough and elevates the construction works to another level.

What's More?


Insulation Block CharacteristicsThe lightweight insulation wall is made with light steel and the lightweight insulation blocks. The blocks are made of room-temperature foam materials, consisting cement and silica sand that are treated with micronization.

The honeycomb structure contains high sound-proof and fire-protection features, which are achieved mainly through the air spheres that are contained in the numerous independent pores. Also, the lightweight insulation blocks are made of inorganic materials, which do not produce any toxic or harmful gas while burning.

Not only the weight of the insulation block is one-sixth of a red brick, it also reduces noise to the tune of 42-53db. Finally, after the insulation block is being burnt under 2000°F for 3 hours, the back of the block only reaches 200°F.

The insulation block not only achieves a light wegiht of the overall structure, it also meets the needs of home quietness and security.


Comparison of Commonly-Used Partition Walls

Types of Wall Reinforced Concrete Wall (RC Wall) Brick Wall Ceramic Tile with Drywall Hollow Block Partition Lightweight Insulation Wall
Sound Insulation 40db 38db 40db 30db-38db 42db
Heat Insulation (Outdoor-Indoor Temp. Difference) 37℉-40℉ 37℉-41℉ Insignificant 40℉-43℉ 48℉-53℉
Fire Rated Protection 1-2 hrs 1-2 hrs 1-2 hrs 1-2 hrs Over 2 hrs
Unit Weight per Sqft Over 72 lb/sqft Over 50 lb/sqft Over 17 lb/sqft Over 7 lb/sqft Over 10 lb/sqft
Construction Speed Slow Really Slow Average Fast Fast (215 sqft/man/day)
Construction Method Wet (sophisticated formwork required) Dry (sophisticated masonry technique required) Semi-Wet Dry Dry (no specific technique required)
Nailing All Types All Types (accessories needed for reinforcement) General Screws Poor General Screws (over 165 lb)
Market Segmentation Main Structures Traditional Construction Structures and Compartment Walls & Floors (low floors) Cheap, Non-Combustible Partition Walls with No Particular Requirements Soundproofing, Fire Safety, Heat Resistance, and Quality
Construction Waste Site Pollution Site Pollution Site Pollution Site Pollution Construction Waste can be Fully Recycled

Construction Project Gallery

Solar Decathlon Europe 2014 - Orchild House - Prize of Urbanism

Buddhist Temple

Taiwan International Airport - A7 Waiting Lounge

Fairly Lake Leisure Farm

The 15th International Architecture Exhibition - Remade Taiwan

Ching Yeh Hotel

Installation Guide for the Lightweight Insulation Block

Better. Safer



*Quote Me*
Bundle Packaging Only
Fire Proof
Sound Proof
Heat Resistance
Energy Saving
Lightweight Yet Solid